Tuesday, February 28, 2012

Let's bring our co-fellow Copier technicians here. 

This blogs is for Copier Technicians (Office Equipment Technician) / Operators as well, who are dealing on Troubleshooting, Repairing, Connectivity on Digital Copiers.

Merging ideas is good... so let's work as a team. 


Tips from Co-fellow technicians are very much welcome, please do post your comment, post reply, enlighten your co-fellow technician simply by sharing your tips. 


just leave your comment and suggestion. 
thanks... 
or Post the problem you encounter....
@your service.. your co-technician.

We talked about it ... we share about it ... we even chat about it .... we work on it and together we solve the problem. And here we are ... we blog it !
The post messages and opinions of an individual are purely based on their experience in regards to their expertise. The purpose of this blog is to educate us and expand the potential of oneself, Replies may differ from another point of view, and it does not suggest that it is the solution thereon. This blog is not a technical manual/service manual... this blog is simply sharing technicians know-how experiences. 

WELCOME to my blog.
Posted by at
Labels: , , , , , , , , , ,

38 comments:

  1. AnonymousFebruary 3, 2012 at 3:26:00 AM PST

    lets start sharing our tips here.....

    ReplyDelete
  2. AnonymousFebruary 3, 2012 at 3:31:00 AM PST

    SHARP AL 1043....with CODE E7

    ReplyDelete
    Replies
    1. AnonymousFebruary 3, 2012 at 3:53:00 AM PST

      Problem Code E7

      Problem related to CCD.

      Delete
  3. REYFebruary 3, 2012 at 3:38:00 AM PST

    KYOCERA MITA 1505..CODE A-400...HOW CAN I FIX?

    ReplyDelete
    Replies
    1. JAKEFebruary 3, 2012 at 3:43:00 AM PST

      CODE A-400 IS A LASER PROBLEM..POLYGON MOTOR CANNOT ROTATE..REPLACED NEW ONE.

      Delete
    2. EZLifeFebruary 3, 2012 at 3:52:00 AM PST

      A400 or C400
      Polygon motor synchronization
      problem

      Defective Polygon Motor ---- Replace LSU

      Delete
    3. reyFebruary 3, 2012 at 4:12:00 AM PST

      thanks co-tech

      Delete
    4. EZLifeFebruary 3, 2012 at 8:06:00 AM PST

      @Jake thnks for the reply...

      @rey... the last resort is...there's conventional way to resolve it... it might work but just try it.

      usually the Polygon Motor stuck, due to the rotor.--- you can remove the polygon motor (be extra care with the polygon) ... clean inside the bushing with lubricating oil.

      It might work... may be not ... if the problem is due to unusual sound.. there's a chance it might work.

      If not.... sorry .. you have to replace LSU

      Delete
  4. REYFebruary 3, 2012 at 3:54:00 AM PST

    CANON IR 22OOi..code E000732-0001

    ReplyDelete
    Replies
    1. AnonymousFebruary 3, 2012 at 4:04:00 AM PST

      DEFECTIVE ADF CABLE CONNECTOR----REPLACED

      Delete
    2. EZLifeFebruary 3, 2012 at 4:06:00 AM PST

      Rey ... Fusing related problem.

      Delete
    3. Celso G.February 3, 2012 at 4:41:00 AM PST

      Reader controller PCB Defective

      Delete
    4. Celso G.February 3, 2012 at 7:38:00 AM PST

      A fault is detected by the main controller PCB in the communication between
      reader controller PCB and the main controller PCB.
      Main cause The connector has poor connection. The reader controller PCB is faulty

      Delete
  5. REYFebruary 3, 2012 at 4:22:00 AM PST

    TOSHIBA eSTUDIO 160...CODE C-26..HOW CAN I FIX?TY

    ReplyDelete
  6. AnonymousFebruary 3, 2012 at 7:09:00 AM PST

    @Rey C-26 is Exposure Lamp problem.

    ReplyDelete
  7. ReynFebruary 3, 2012 at 8:15:00 AM PST

    what about problem or solution pertaining Fax and Printers, can it be welcomed here?

    ReplyDelete
    Replies
    1. EZLifeFebruary 3, 2012 at 8:21:00 AM PST

      @Reyn ...

      Digital Copiers are Multi Function now these days...

      Welcome...

      Delete
  8. AnonymousFebruary 5, 2012 at 11:12:00 AM PST

    kabayan yung Toshiba 203, Beep and O- code? won't initialize

    ReplyDelete
  9. reyenajeFebruary 6, 2012 at 9:37:00 AM PST

    mita dc1460...problem code AP..how cac i fix?ty

    ReplyDelete
  10. EZLifeFebruary 6, 2012 at 10:35:00 AM PST

    @reyenaje...
    AP means machine is in process of Adding Toner. If no toner on the machine, the Toner sign will appear.

    This machine is quite very very old...
    Change Developer...
    Make sure about the toner hopper assy. It might be stuck thus preventing the toner to feed (make sure that by turning the agitation shaft on the toner feed roller is smooth when turning it manually. Check all possible causes with the toner feeding and recyclying system.

    Then check the toner motor.. is it rotating while the AP sign is present?

    Good luck
    pls sign in also :) ..

    ReplyDelete
    Replies
    1. reyenajeFebruary 6, 2012 at 9:06:00 PM PST

      thanks co-tech for the info...done sign in.:)

      Delete
  11. AnonymousFebruary 7, 2012 at 2:57:00 AM PST

    kabayan..
    Canon IR 2022

    Waste toner full.

    Na empty na ang waste toner... pero me sign pa din na WASTE TONER FULL.

    Machine printing good copy.. how to remove the WASTE TONER FULL message..
    ty

    dan

    ReplyDelete
  12. AnonymousFebruary 8, 2012 at 7:58:00 PM PST

    Canon IR 2022
    makikita mo un un front side lever un color black bale un ang mag aactivate dun s photo interruptor n umiigkas un pag napuno n ung dispossal tank s drum

    CG

    ReplyDelete
    Replies
    1. EZLifeFebruary 17, 2012 at 10:33:00 AM PST

      CG ... many thnks ...

      yup ok na...

      pero pinalitan na din ng drum unit kahapon :) .

      Delete
  13. AnonymousFebruary 21, 2012 at 3:50:00 AM PST

    INEO 163
    PROBLEM CODE C 0510

    How i can i resolve this problem..

    Operator..
    tnkx

    ReplyDelete
    Replies
    1. EZLifeFebruary 21, 2012 at 11:39:00 AM PST

      C 0510 problem is related to Fuser unit.

      you can reset it .. if problem still occurs ... you might need to change the Fuser part.

      Delete
  14. reyenajeFebruary 22, 2012 at 11:22:00 AM PST

    model TA-DC 2250 or KYOCERA KM-5050..PROBLEM IS "CONTINOUS PROGRAM LOADING"

    ReplyDelete
    Replies
    1. AnonymousFebruary 22, 2012 at 12:08:00 PM PST

      @Rey..

      pag di nakuha sa Turn Off and On...

      upgrade firmware

      dans

      Delete
  15. AnonymousFebruary 24, 2012 at 3:29:00 AM PST

    Good news for smart phones...

    This blogsite is good... it will serve as quick refence guide using smart phone

    Samsung android

    ReplyDelete
  16. AnonymousFebruary 26, 2012 at 5:43:00 AM PST

    Kyocera FS 6025....
    Need help or advise...
    New machine we try to install scanner...
    Error say. 1102

    ReplyDelete
    Replies
    1. EZLifeFebruary 27, 2012 at 10:26:00 AM PST

      Error means your PC and machine is not communicating.

      TIP:
      Scan to SMB, when you create a file folder on your PC please make sure on Properties > Sharing is in Full Control.

      Your problem will be resolve.

      (considering that you were able to set up properly)

      Delete
  17. reyAugust 21, 2012 at 11:30:00 AM PDT

    rex rotary mp 1350...how to put user password..tnx in advanced

    ReplyDelete
  18. UnknownFebruary 11, 2014 at 1:57:00 AM PST

    Digital copiers today are computers with chips and memory inside them. That means that sensitive documents that are scanned and copied are stored within the copier.

    ReplyDelete
  19. UnknownJune 11, 2014 at 10:43:00 AM PDT

    We are getting a new photocopier for the office this month. I got the fun task of choosing the new model. We got a pretty nice budget for it, too, so I'm looking forward to having something truly cutting edge to help our work. Thiago | http://www.officenational.com.au/shop/en/chrishumphrey/home

    ReplyDelete
  20. UnknownJuly 15, 2014 at 2:58:00 AM PDT

    These copiers because of their digital technology are also computer printers, fax machines, and scanners.
    Colour Digital Copiers

    Thanks for sharing...!!!

    ReplyDelete
  21. brainDecember 30, 2015 at 2:12:00 AM PST

    Awesome advice! It worked.. thank you for saving me a service call!

    ReplyDelete
  22. MandyJuly 14, 2016 at 7:58:00 PM PDT

    I have one question about copier. If i want to use security in my copier machine. Is there available lock security? I'm asking this question because i don't know about security lock.please tell me, otherwise i can use it.

    ReplyDelete
  23. umerDecember 22, 2016 at 3:07:00 AM PST

    Very informative article which is about the copy and i must bookmark it, keep posting interesting articles.
    copy

    ReplyDelete

Subscribe to: Post Comments (Atom)