Toshiba Copiers Error Messages.
Applicable to the following models
Toshiba E160; E200
Toshiba E16; E20; E25
The Service Call sign which usually appears as "Wrench" image on the panel board, means the machine has a problem. Identifying the Error codes press "8" and "Clear/Stop" keys simultaneously to read for the Error.
NOTE: All error codes can be reset by turning Off and On of your machine except for the Fixing or Fuser problem codes.
And these are the details of the Error codes.
Applicable to the following models
Toshiba E160; E200
Toshiba E16; E20; E25
The Service Call sign which usually appears as "Wrench" image on the panel board, means the machine has a problem. Identifying the Error codes press "8" and "Clear/Stop" keys simultaneously to read for the Error.
NOTE: All error codes can be reset by turning Off and On of your machine except for the Fixing or Fuser problem codes.
And these are the details of the Error codes.
- C01 Main Motor Problem
- C04 PFP Main Drive Problem on Tray 3
- C21 Scan Problem
- C26 Exposure Lamp
- C38 Replace Process Unit Error
- C41 Fixing thermistor/low temperature
- C43 Fixing temperature problem even after warm up has completed
- C45 Fixing Thermistor defective
No comments:
Post a Comment